Yoshitake
Solenoid Valve/Motor Valve
* The shock of water hammer is reduced, and the closing time of valve is shortened
* No leakage at valve seat because synthetic rubber is used for valve part
* Usable for wide pressure range of 0 - 1.0 MPa (0.1 - 1.0 MPa if the coil set sideways)
| Features | AC, diaphragm, normally closed | |
|---|---|---|
| Type | Diaphragm type solenoid valve | |
| Specifications | Product type | Solenoid Valve_Diaphragm |
| Nominal size | 10A (3/8") - 50A (2") | |
| Application | Water, air, N2 gas, CO2 gas (dry), Ar gas | |
| End connection | JIS Rc screwed | |
| Max. pressure | 1 MPa | |
| Working pressure | 0 - 1 MPa (not usable under vacuum) | |
| Max. temperature | 60 degree(C) (5 - 60 degree(C) no freeze condition) | |
| Min. differential pressure | 0 MPa (0.1 MPa or more is required when installed with the coil sideways) | |
| Ambient temperature | Max. 50 degree(C) (no freeze condition) | |
| Rated voltage | AC 110/220V selective type - 50/60Hz common | |
| Valve seat leakage | None (by confirming pressure gauge visually) | |
| Installation posture | Horizontal or vertical (the coil has to be within 90 degrees from upward position) | |
| Protection class | IP64 | |
| Material | Body | Bronze |
| Valve | NBR (Diaphragm) | |
* Available with rubber material FKM for the diaphragm. Max temperature:90℃.
* Also available with terminal box.
| Size | L (mm) | H | Weight | Cv value |
|---|---|---|---|---|
| 10A(3/8) | 70 | 114 | 1.1 | 3(1.2) |
| 15A(1/2) | 70 | 114 | 1.1 | 4(1.7) |
| 20A(3/4) | 80 | 121 | 1.3 | 7.5(3.2) |
| 25A(1) | 95 | 128 | 1.7 | 10(4.6) |
| 32A(1 1/4) | 110 | 150 | 2.5 | 14(5.5) |
| 40A(1 1/2) | 120 | 157 | 3.1 | 17(6.5) |
| 50A(2) | 140 | 172 | 5.0 | 24(9.5) |
*Values in the bracket indicate Cv values when the differential pressure is below 0.01MPa.
